How do I evaluate a used sprayer?

Check the plumbing before the paint

STILLWATER, Oklahoma — A used sprayer can be a good buy or an expensive lesson, and the difference usually sits in places you cannot see from the driver's seat. Pumps, hoses, boom plumbing and controllers wear in ways that do not show on a quick walkaround. A careful inspection and a water test will tell you far more than the hour meter or the fresh coat of paint.

Learn the machine's history

Ask the seller what the sprayer was used for and what chemicals went through it. Ask about cleanout habits. Herbicide residue can damage sensitive crops, and some products are harsh on seals and hoses. Ask for maintenance records, pump rebuilds, nozzle replacements and any repairs to the boom.

Check the label and equipment guidance from EPA's pesticide program for general information on handling and cleanout. A sprayer with a careless history may be a problem even if it looks fine.

Inspect the tank, pump and plumbing

Look inside the tank for cracks, discoloration and residue. Check the lid, strainers and agitation system. Inspect the pump for leaks, worn diaphragms or seals and unusual noise. Examine hoses for cracking, swelling or soft spots, and check the fittings and clamps.

Run the pump with clean water and look for pressure fluctuations, leaks and weak agitation. Pressure that will not hold steady points to trouble in the pump, regulator or controller.

Pay special attention to what the sprayer smells and looks like inside. A strong chemical odor, stained tank walls or crusted residue near the lid are signs that cleanout may have been skipped. Residue left in plumbing can show up later as injury to a sensitive crop. If you plan to spray something that can be damaged by trace amounts of another product, ask a dealer or an extension specialist how a used tank should be cleaned and whether certain parts should simply be replaced.

Test the boom and nozzles

Unfold and fold the boom several times. Check for bent sections, loose pivots, worn bushings and slow hydraulics. Look at the boom height controls and any leveling systems. Bent booms make uneven applications, which means skips and overlap.

Spray clean water and look at the pattern from each nozzle. Check for plugged or dripping nozzles, mismatched tips and uneven output. A catch test, collecting output from several nozzles over a set time, shows whether they are delivering similar volumes.

Check the safety and application details as well. Look at the nozzle bodies, the strainers, the check valves and the shutoff operation, since drips after shutoff waste product and can burn crops. Make sure the boom folds and locks properly, and that the transport position is safe on the road. If you can, ask the seller to run the machine for a few minutes with water while you watch every connection for weeping.

Check controllers, GPS and electronics

Turn on the rate controller, flow meter, pressure sensor and any section control. Make sure the screen works and buttons respond. Ask whether the system is current and whether it can be updated or serviced locally. Old electronics can be hard to support.

If the sprayer has GPS guidance or auto-boom features, test them and ask about subscription or software requirements. Verify that the system will work with the equipment you use.

Inspect the chassis and drive

On self-propelled units, check the engine, transmission, tires, axles, cab and cooling system the way you would any used tractor. Look for oil leaks, worn steering parts and damage from rough use. Review the engine's service history.

Have a local dealer technician look at it if you can, and ask for a written estimate on any repairs needed. Compare the sprayer's condition and your needs against what the seller is asking, then request multiple quotes for similar units from different sellers. Prices change, so rely on current listings and written offers. Extension services and the Nebraska extension publish sprayer calibration and maintenance guides worth reading before you shop.

Chemicals are an expensive way to find out a boom is crooked. Run the water test, and if the seller will not let you, find another sprayer.