How do I find a dealer for harrows and drags?

Simple tools, still worth asking about

ABILENE, Texas — Harrows and drags are simple tools, so plenty of dealers sell them, but not every dealer stocks every kind. The fastest way to find one is to decide what job you need it for, ask local farmers and ranchers who use them, and then call the dealers they point to. Many are also made by regional manufacturers and sold through independent implement dealers rather than the big-name lots.

Know what you're shopping for

The names get used loosely, so pin down the tool:

Write down your tractor or ATV, hitch type, the width you want, and what you're dragging: pasture, field, lane or arena. Weight and tractor size matter, because a wide harrow can overwhelm a small tractor.

Places to look

  1. Independent farm implement dealers, which often carry harrows and drags or can order them
  2. Farm and ranch supply stores and feed stores
  3. Regional manufacturers' dealer lists on their websites
  4. Neighbors and local ranchers, who know who stocks and services what
  5. County extension, through extension.org, and the Noble Research Institute, which publishes pasture and ranch management material
  6. Used equipment sales and auctions, where harrows and drags show up often

Because these tools are simple, a good local welder can often repair them, which is worth keeping in mind when comparing prices and sources.

Questions for the dealer

Ask to see it up close. With a harrow, you're judging steel and welds, not electronics, so a good look tells you a lot.

Compare in writing

Get written quotes that list the tool, width, options, freight and any assembly. Costs depend on size, construction and region, so quotes beat estimates. Compare what you're getting for the money, including weight and build quality. For a used one, check frames, hitches, teeth and bearings, much as you would on other tillage tools.

Matching the tool to the tractor

A harrow that's too big for your tractor either stalls it or wears out the hitch. Check the manufacturer's recommended horsepower range and ask the dealer how many acres per hour you can expect. Consider whether you need a folding or transport-friendly design for narrow gates and roads. If you want to use it behind a smaller tractor or ATV, check weight and drawbar load, and ask what happens to the hitch point. Also think about storage. A harrow left in a fence row grows grass in its teeth and rusts through quickly, so find a place to park it.

Consider how you'll use it

If you drag only a few acres a year, renting or borrowing may beat buying. Some conservation districts and neighbors lend equipment. Pasture drags can spread manure and break up piles, but check the weather and local rules on manure handling, and talk with NRCS if you want to learn about conservation practices tied to grazing and nutrient management. farmdoc daily offers help working through ownership costs.

Before you buy anything new, check what you already own. A length of heavy chain, a pallet of old tires or a section of fence panel on a drag frame can handle light pasture work, and many ranchers build their own. If you do buy, keep it simple, keep the teeth sharp or the chain unkinked, and store it off the ground. That alone will extend its life by years.