How do I find a dealer for harvesting heads?
Locating corn heads, grain platforms, and more
ALBERT LEA, Minnesota — Harvesting heads, the front-end attachments that cut or strip the crop ahead of a combine, are sold by new equipment dealers, used equipment dealers, auction companies, and some independent brokers. Which you pick depends on the crop, the combine you run, and how much risk you can take on. Because a head must match the combine's feeder house, finding a dealer who knows the fit matters more than finding the closest one.
Know exactly what you need
Write down the combine make, model, and feeder house type, plus the crop. A corn head, grain platform, draper header, and row-crop head are different tools. For corn, note row count and spacing. For small grains, think about header width and whether you cut a lot of lodged crop. Heads that don't match the combine adapter will need additional parts, and the dealer should tell you that before you buy.
Where dealers turn up
Start with the dealer who services your combine, since they know your machine and can often source a head from other stores. Then check dealers in neighboring counties and states, because harvest equipment moves across regions. Auction listings, regional equipment classifieds, and farm newspapers are also productive. Ask neighbors who've bought heads recently; their stories about condition and honesty are worth more than any ad.
What to ask the dealer
- Does the head fit my combine without an adapter, and who supplies the adapter?
- Are there recent repairs to the gearboxes, knives, or deck plates?
- Can I see it run, or inspect it standing up?
- How many acres or hours has it covered, and what crop?
- Is a warranty or short inspection window offered on used heads?
Inspect before you commit
Check for cracks in the frame, worn deck plates, loose gathering chains, damaged snouts, and wear on stalk rolls and knives. Look at the gearbox for leaks. Turn the drive by hand if possible and listen for roughness. Worn parts on a head can add up fast, so ask for a list of replacement parts and have the dealer quote them. The Kansas State Research and Extension site and Iowa State Ag Decision Maker both offer machinery guidance that can help with harvest losses and costs.
Plan ahead for the season
Think about the crop and the conditions
Different crops need different heads, and conditions change what works. Down corn, lodged small grains, and weedy fields can each call for particular features. Ask extension agronomists in your area about common harvest losses and what to watch for. Head settings, speeds, and knife condition affect how much grain ends up on the ground. Losses can add up across a whole field, so treat the head as part of your yield, not just as an accessory.
Think about hauling and storage
A head is big. Work out how you'll move it between fields, whether you need a head trailer, and where it will sit in the off season. Rain and sun can damage a head left out for months. Ask the dealer about trailer fit and about transport rules in your state, since width limits and flag requirements vary. If you rent or borrow a head, ask who covers damage and wear.
Ask about transitions and trade-ins
If you're replacing an older head, ask whether the dealer takes it in trade or helps you sell it. Heads from retired combines can be worth more as parts than as working equipment, and some dealers buy them for that reason. Ask what price range similar heads have brought lately, and compare at least two dealer responses before you decide. Keep your old head's records, since they help set a fair value.
Heads sell before harvest, and the best used ones go quickly. Start your search well ahead of the season, and arrange for any shipping or hauling. Also confirm the head can be transported legally; width and weight rules vary by state, so check with your state transportation office. If you want financing, the Farm Service Agency can tell you about farm equipment loan programs. Get everything in writing, and keep your receipts for tax purposes using IRS Publication 225.
