How do I find a dealer for post hole diggers?
From PTO augers to skid steer attachments
HARRISONBURG, Virginia — Post hole diggers are a common enough tool that you can find them at many farm stores, but the right one depends on your tractor, soil and how many holes you're digging. A tractor dealer, an attachment dealer and a rental yard might all be able to help. Here's how to find the right one and what to ask when you get there.
Decide which type you need
Post hole diggers come in several styles. Three-point hitch PTO-driven diggers run off a tractor's PTO shaft. Skid steer or loader-mounted augers run off hydraulics. Smaller handheld gas or hydraulic augers suit light jobs, and some units mount on a utility vehicle. Pick based on your power source, hole size and depth, soil type, number of holes and how often you'll use it. Rocky or clay soil needs different auger bits than loose soil. A one-time fence job might be better rented than bought.
Where to look
Start with implement dealers that sell and service your tractor, since they can match the digger to your tractor's PTO horsepower, hitch category and lift capacity. Farm and ranch supply stores, attachment specialists, rental yards and fencing suppliers also carry them. Fence contractors can recommend what works in your soil. Used diggers show up at farm auctions and online listings, though inspect carefully. Your local extension office can suggest what other farmers in the area use. Extension.org is a starting point for finding your state's office.
Match the digger to your tractor
Ask the dealer to confirm that the digger is compatible with your tractor's PTO speed, horsepower range, hitch category and hydraulic setup. Check that the tractor can lift the digger and hold it steady, and that the PTO shaft length and shielding are suitable. Ask which auger sizes are available and whether the auger bits can be swapped. Check whether a gearbox shear pin or slip clutch is used to protect the drive when you hit a rock. Ask about stabilizer features or weights if you're digging deep holes.
Questions to ask
Ask about available auger diameters, auger length, and replacement bit availability. Ask what the warranty covers and what maintenance is needed, such as gearbox oil and greasing. Ask if the dealer stocks replacement parts like shear bolts and bit teeth. Ask whether they can demonstrate the digger or let you test it in your soil. Ask for a written quote including any shipping, setup or extra auger sizes. Compare the same specifications across dealers. If you're renting, ask about deposits, delivery and damage terms.
Dig safely
Post hole diggers can cause serious injuries, particularly through entanglement with the auger or shaft. Keep shields in place, stay clear of rotating parts, wear fitted clothing and never reach for a stuck auger while the PTO is turning. Call your state's utility locating service before digging, since striking a buried line is dangerous. Follow safety guidance from OSHA and NIOSH.
Auger bits, soil and depth
The auger itself matters as much as the digger. Ask about bit diameter for your posts, the length of the auger, and whether replacement teeth and points are available. Rocky soil, frozen ground and heavy clay need tougher bits and often lower speed. For deep holes, extension augers may be offered. Check that the auger's shaft fits your gearbox output and that a shear pin or slip clutch protects the drive when it hits a rock. If you dig often, keep spare shear bolts in your toolbox so a snapped pin doesn't end the day.
If you only need holes for one fence job, ask what a rental costs per day compared with owning, and compare delivery and damage terms in writing before choosing.
A good digger turns a long fence day into a shorter one. A badly matched one turns it into a long phone call with the tractor dealer. Check the hookup details first, and the posts will take care of themselves.
