How do I find a dealer for sprayer nozzles?

Match the nozzle to the job first

PEORIA, Illinois — Sprayer nozzles are small, cheap compared with the machine that carries them, and surprisingly easy to get wrong. The dealer who sells you the right nozzle is the one who asks what you're spraying, at what speed and at what pressure. Finding that dealer takes a little prep. You'll want to call farm supply stores, crop input retailers, equipment dealers and specialty spray suppliers, and judge them by their questions as much as by their stock. A shelf full of nozzles does you no good if nobody can tell you which one fits your product label.

Know what you need before you call

Pull the product label for what you plan to apply. The label often specifies droplet size, spray volume per acre, pressure range and drift-reduction requirements. Federal pesticide labels are legally binding, so the nozzle choice isn't only about coverage. The EPA pesticides site explains how labels work and why following them matters. Write down your sprayer's boom spacing, target ground speed, desired application rate and nozzle body type, since nozzles must match the cap and body on your boom.

Where to look

The Certified Crop Adviser program lists professionals who can help with application practices.

How to judge a nozzle supplier

A good supplier asks questions: what product, what rate, what speed, what boom height? A weak one hands you whatever is in the bin. Ask whether they can supply a flow chart or rate chart for the nozzle you're considering, and whether they stock the same nozzle in several sizes so you can adjust. Ask about the materials, because ceramic, stainless steel and plastic wear differently depending on what you spray. Ask how you can tell when a nozzle is worn, since worn nozzles put out too much product and distort the pattern.

Calibration and checking

Whatever you buy, calibrate. Catch the output from each nozzle for a measured time and compare it with the chart, and replace any nozzle that's off from the rest by more than a small margin. Mixing old and new nozzles on a boom is a common cause of streaks. Check that all nozzles are the same type and size across the boom. State extension services and land-grant universities publish sprayer calibration guides, and your local extension office can help you find one.

Compare options

Get a written quote that lists each nozzle by part number, quantity and size. Ask about return policies on nozzles you can't use, and whether the supplier can order a particular type if it isn't in stock. Compare lead times, since spray season doesn't wait. Keep spare nozzles and tips on hand, along with a nozzle wrench and a soft brush for cleaning. Never clean a clogged tip with a wire or a pocketknife, which can ruin the orifice.

If you're stocking up for the season, think about spare parts as a package. A few spare tips of each size, a spare diaphragm or check valve, a strainer screen and a gasket or two cost little and can keep a spray window from slipping away. Label a small box and keep it with the sprayer rather than on a shop shelf across the yard. Write the part numbers on the lid. When you order, ask the supplier whether they'll accept returns on unopened parts, and whether they can cross-reference your existing nozzles so the whole boom stays uniform. Uniformity matters more than brand loyalty. Write down what you learn and the date you learned it, then compare notes across your sources before you commit to anything. A few minutes of comparison now usually saves a lot more time later, and it gives you something concrete to point to if a question comes up.

One extra bit of advice: buy the nozzles before the weather window opens, not after. The wind has a way of being perfect on the day the parts counter is closed.