What should I inspect on a used harrow?
A walk-around checklist
SIOUX FALLS, South Dakota — Harrows are simple machines, which is why people buy them used and why condition varies so much. A chain harrow, a tine or spike-tooth harrow, a disc harrow, and a drag harrow each wear in different places, but the inspection logic is the same: look at the frame, the working parts, the hitch and transport features, and signs of how the machine was treated. Do it in daylight, on level ground, with a notebook and a flashlight.
Start with the frame and welds
Walk all the way around before touching anything. Look at the main frame, toolbars, and sections for cracks, repaired cracks, bends, and twisted members. Pay attention to welds, because a fresh weld in a stress area can mean the machine has already failed once. Look for rust that has eaten through metal, not just surface rust, which is normal. Check that the frame sits square and that sections line up. A harrow that tracks crooked in the field often has a bent frame or uneven hitching.
Hinge points on folding or wing sections deserve extra attention. Wiggle them. Excess play, elongated pin holes, or missing bushings mean wear and eventual failure.
Check the working parts
On a tine or spike-tooth harrow, count missing or bent teeth and check how worn the tips are. Ask whether replacement teeth are available and how they attach. On a chain harrow, look at the links for stretch and wear. On a disc harrow, check the blades for dull edges, cracks, and chips, the scrapers, and the gangs. Spin the gang by hand or lift it and listen for rough bearings. Check that the axle isn't bent and that blade spacing is even.
Replacing a few teeth is routine. Replacing most of them, or a full set of blades, changes the value of the deal and should show up in your offer.
Look at bearings, hitch, and hydraulics
Grease fittings tell a story: clean, working fittings suggest someone maintained it, while missing or plugged ones suggest the opposite. On disc harrows, check bearings for play and seals for leaks. Inspect the hitch, drawbar pin holes, and any category pins for wear. If the harrow folds or lifts hydraulically, look at cylinders, hoses, and fittings for leaks, rubbing, and damage. Operate the fold if you can, from one end of travel to the other.
Check safety features: transport locks, reflectors, warning decals, safety chains, and lighting if the machine will travel on roads. Your state may have its own road rules for towed farm equipment, so confirm those locally.
Ask the seller the right questions
Find out how many acres or hours it has covered, what ground it worked (rocky ground is hard on any machine), and what repairs were done. Ask for service records, though honest sellers of older implements may have none. Ask why it is for sale. Ask whether you can see it hooked up and working. A short pass in a field shows pulling behavior, vibration, and how the sections follow the ground.
Confirm the seller has clear title or can sell it free of liens, and write a simple bill of sale that lists the machine and the agreed terms.
Weigh it against the alternatives
Check what comparable harrows sell for in your area by looking at listings, auction results, and dealer inventory. Do not take one number as gospel, because condition and region swing prices widely. Price any needed repairs with a written quote and subtract it from what you are willing to pay.
Also match the harrow to your tractor: width, weight, and hitch. The Nebraska Tractor Test Laboratory can help you understand drawbar and power ratings, and Iowa State's ag decision maker has machinery cost tools for deciding between used and new. For tax questions on buying used equipment, see IRS Publication 225.
Test it in the field if you can
A harrow that looks tidy in the yard can behave badly once it is moving. Ask to hook it behind a tractor and pull it a hundred yards or so. Watch whether it rides level, whether the sections follow each other or one side climbs, and whether anything rattles, rubs or drags. Listen for bearing noise on disc models. Check that the tines or discs actually penetrate to the depth you want and that the machine does not plug with residue. If the seller says it is not possible to try, ask why. Honest sellers of a decent harrow are usually glad to show it working. Also look at the tires or wheels used for transport, since flat or cracked ones turn a cheap harrow into a repair project right away.
If the frame is bent and the seller shrugs, walk away. There is always another harrow in somebody's fence line.
