What should I inspect on a used spreader?
Floor, beaters, and gearbox
CEDAR RAPIDS, Iowa — A manure or fertilizer spreader works in about the harshest conditions on the farm: corrosive material, heavy loads, and constant vibration. That means the used market has plenty of machines that look fine from the road and are rusted out inside. A careful inspection, done with a clean machine and a flashlight, will tell you far more than the seller's description.
Know the type
Spreaders vary: box spreaders with chain or apron floors, vertical beater units, horizontal beater units, slinger or tank spreaders for liquid, and dry fertilizer spreaders such as broadcast or drop types. Each wears differently. Ask the seller what material it was used for. Liquid manure, dry litter, and lime all affect different parts.
Have the machine cleaned out before you look at it, if possible. Caked material hides rust and cracks.
Box, floor, and frame
Look at the box sides and floor for thin metal, holes, and patches. Rust-through is a common failure. Examine the frame and axle for cracks and for repairs. Check welds in stress areas. On a chain or apron floor, look at the chains for stretch, broken links, and worn sprockets. Check the slats or floor panels. Look at the endgate and its seals. Wood floors, if present, should be sound.
Wiggle the hitch and check the tongue. Look at the jack and the pin holes for wear.
Beaters, augers, and spinners
On a beater spreader, inspect the beaters and flails for wear, bent paddles, and missing teeth. Turn the beaters by hand if possible and feel for rough bearings. On a fertilizer spreader, check spinner discs, vanes, and the gate for wear, because worn vanes change the spread pattern and application accuracy. Look at the hopper for cracks and corrosion.
For any spreader, ask whether the pattern was ever tested. An uneven pattern wastes nutrients and can hurt yields. Your extension office can explain how to run a spread pattern test.
Driveline, gearbox, and hydraulics
Check the PTO shaft for shield condition, and replace missing guards. Look for oil leaks around the gearbox and listen for noise when it runs. Check the oil condition. Inspect chains and sprockets, tensioners, and drive shafts. If the spreader has hydraulic features, such as a floor drive or gate, check hoses, cylinders, and fittings for leaks and damage. Run the machine through its functions if you can.
Look at the tires and wheel bearings, and the brakes and lights if it travels on roads. Check slow-moving vehicle signs and reflectors.
Ask questions and price the repairs
Ask about the age, how many loads or acres it covered, what was spread, what repairs have been made, and where it was stored. Ask for any service records. Ask to see it working, and watch the pattern and flow. If problems appear, price them using written quotes from a parts counter or shop. Subtract expected repair cost from what you offer.
For title and lien issues, confirm the seller has clear ownership and write a bill of sale.
Calibration matters: a spreader that is not calibrated can overapply or underapply. Extension publications, such as those from Purdue and Penn State, discuss calibration and nutrient management. If you spread manure, check your state's nutrient management rules and the NRCS conservation practice standards.
Safety first: use lock-out and keep clear of beaters and the PTO. See NIOSH agriculture.
Check the details that sellers forget
Look at the hitch clevis or pin, the safety chains, and any hydraulic couplers for wear. Make sure the endgate latch or door works, and that any shields over chains and drives are present. Inspect decals for operating instructions, because missing ones suggest the manual may be missing too. Ask whether a manual comes with the machine, and look up the manufacturer's parts availability for wear items like chains, beaters and bearings. If parts are scarce, repairs get expensive in time even when the part price is low. A used spreader is a bargain only if you can keep it running without a long wait for each part.
A spreader with a floor like Swiss cheese is cheap for a reason, and you will be paying it back all season.
