What are typical implement maintenance costs?
Count the pieces, not the average
MADISON, Wisconsin — Maintenance costs for implements swing widely depending on the type of tool, how many acres it covers, the soil it works in and how well it's kept. A plow in rocky ground and a mower on flat pasture don't wear alike. So instead of giving you a number that may be wrong for your farm, here's how to estimate your own costs and where to find current figures from reliable sources.
Break maintenance into categories
Maintenance usually falls into a few buckets: wear parts that get replaced on a schedule, such as shanks, points, blades, knives, tines, belts and bearings; fluids and lubricants; routine repairs; shop time; and replacement of larger components. Make a list of the parts on each implement that wear out and how often. Your operator's manual shows service intervals and your service records show what really happened.
Use published machinery cost resources
University Extension programs publish machinery cost estimates and explain the methods behind them. Iowa State's Ag Decision Maker is one place to look, and farmdoc daily publishes machinery economics articles. These tools usually estimate repair costs as a share of the machine's list price over its life, which you can adjust to your situation. Check the date and assumptions on any figure before you rely on it.
Track your own costs
The most useful numbers are your own. Keep a simple record for each implement: acres or hours used, parts replaced, labor, shop invoices and notes. After a couple of seasons you'll see which tools are cheap to keep and which are costing more than they're worth. A notebook in the truck or a basic spreadsheet is enough.
Know what drives costs up or down
Several factors move maintenance costs:
- Soil type and rock content
- Acres or hours per year
- Operator habits and speed
- How quickly small problems get fixed
- Quality of the replacement parts
- Storage, since weather and rust shorten the life of tools left outdoors
Greasing on schedule and checking wear parts before they fail is almost always cheaper than fixing the damage later.
Compare repair, rebuild and replace
When an older implement needs a big repair, compare the repair quote against the value of the tool and the cost of a replacement. Ask for written quotes from a shop for the repair and from dealers for a replacement. For loans, see farmers.gov. For tax treatment of repairs versus improvements, check IRS Publication 225 and ask your tax professional.
Plan the work for the slow season
Do inspections and maintenance in winter, when shops aren't swamped and parts orders can be placed with time to spare. Order wear parts ahead of the season.
Where the money quietly leaks
Not every maintenance cost shows up on a shop invoice. Lost field time while an implement is down is a cost. So is damage from a failed part that took out something more expensive. A dull blade or worn point can raise fuel use and slow your work, which costs you even when you pay no repair bill.
Pay attention to the small stuff. Loose bolts, dry bearings and plugged grease fittings cause more trouble than most people expect. A quick walk-around before each use catches many problems. Keep a simple checklist in the tractor cab and a grease gun where you can reach it.
Storage matters too. An implement kept under cover and cleaned before storage usually lasts longer than one left in the weather. Wash off soil and residue, touch up bare metal, and coat bare steel surfaces if recommended. Record the time spent and parts used, and compare it to your yearly record. Over time, that record tells you when an implement has become more expensive to keep than to replace.
The tool that gets a quick look every season usually outlasts the one that only gets attention when it breaks. Your own records are the best estimate you'll get.
