What should I check on a used feed mixer?
Look past the paint and the price tag
WORTHINGTON, Minnesota — A used feed mixer can be a fine buy or a slow-motion repair bill, and the difference usually shows up in the parts that touch feed every day: the augers, knives, floor, gearbox and scale head. Plan on an hour with the machine, a flashlight, a notebook and a willingness to crawl around underneath it. If the seller rushes you, that tells you something too. Below is the order I'd work in, from the cheapest checks to the ones that take real tools or a second opinion from your own mechanic.
Start with the paperwork and the history
Before touching steel, ask how the mixer was used. A unit that mixed dry hay and grain for a small cow-calf herd lives a different life than one that ground wet silage and haylage in a busy dairy. Ask what rations it mixed, how many loads a day, and whether it ever sat outside through winters. Ask for service records, gearbox oil change history and a list of any parts replaced. Get the serial number off the plate and have the dealer or manufacturer confirm the model and any known recalls or service bulletins. Check that the PTO driveline, shields and safety decals are all present. Missing guards are an OSHA concern and a real hazard to anyone working around it.
Inspect augers, knives and the mixing chamber
Climb in only after the PTO is disconnected, the tractor is off and the key is in your pocket. Look at auger flighting for thin edges, cracks and patched welds. Flighting wears from the outside in, so a worn edge means poorer mixing and longer batch times. Check the knives: are they sharp, are any missing, and are the mounting points elongated or cracked? Look at the tub floor and walls for thin spots, pinholes or heavy rust, since a mixer that leaks liquid or lets feed hang up is frustrating all season. Run a hand along weld seams. Fresh welds in odd places often mean past cracks. Ask whether the knives and flighting are replaceable and whether parts are still available.
Check the drivetrain and gearbox
Have the seller run the mixer empty, then watch and listen. Humming is normal; grinding, knocking or a chain that slaps is not. Pull the gearbox fill and drain plugs if you can. Milky oil suggests water, and metal flakes on the magnetic plug suggest wear. Look for oil weeping from seals at the output shafts. Inspect the PTO shaft for worn U-joints, bent tubes and a slip clutch that has been abused. Turn each U-joint by hand and feel for play. If the unit uses chains or belts, look for stretched links, missing teeth and uneven wear on sprockets. Hydraulic doors and discharge conveyors should open and close smoothly without leaks at the cylinders and fittings.
Test the scale system and discharge
A mixer that can't weigh accurately wastes feed and ruins rations. Ask to see the scale head power up, check that the load cells or weigh bars are intact, and put a known weight on the unit if possible. Look at the wiring for cut, chewed or taped sections; mice love scale cables. Check for loose or corroded junction boxes. Also confirm the head is a model the manufacturer still supports, because an obsolete indicator can be hard to fix. Run the discharge door and conveyor and watch for binding. If it's a trailer, look at tires, axle, hitch and brakes too.
Compare, then get it checked
Find a few similar machines and compare them on condition and hours or loads rather than on asking price alone. The Iowa State Ag Decision Maker site has machinery cost guidance that helps you think through ownership costs, and farmdoc daily covers equipment decisions as well. If you're serious, ask to have a dealer technician or an independent mechanic look it over, and agree in writing on what the seller will fix. Written quotes for any needed repairs, plus a clear bill of sale, protect you after the handshake. The safest mixer is the one whose problems you already know about.
Walk away from anything with cracked tub welds, a failing gearbox or a scale that nobody can explain. There's always another mixer; there's only one set of fingers.
