What should I check on a used mower?

A checklist for buying a used mower

WAYNESBORO, Virginia — Before you buy a used mower, check the blades or cutting elements, the gearbox and driveline, the deck or cutter bar for cracks and weld repairs, the safety shields, and every bearing and belt you can reach. Hay mowers, rotary cutters, flail mowers and disc mowers all have different wear points, but the method is the same: look, listen, shake and run it. This guide gives you a plan you can follow whatever type you're shopping for, plus a few questions for the seller.

Look at the cutting parts

On a rotary cutter, check the blade pins, blade carriers and spindle for wear. On a disc mower, look at the cutterbar, blade bolts and disc condition. On a sickle mower, check guards, knives and the drive. Worn or bent parts affect cut quality and safety. Ask how often blades have been replaced and whether sharpening was done properly. Check for cracked or patched welds on the deck, a classic sign of hard use or hitting something solid.

Gearbox, driveline and bearings

Pull the gearbox fill plug and check oil level and condition. Milky, metallic or burnt oil is a bad sign. Look for leaks around seals. Spin the blades or discs by hand where it's safe and shut down, feeling for roughness. Check driveline shaft guards and universal joints for play. Wiggle spindles and wheel hubs for slack. Ask which parts have been replaced and when.

Run it

With the tractor running and everyone clear, engage the PTO at low engine speed and listen. Watch for vibration, knocking, or wobble. Run through the full range of height adjustments and lift cycles. Check that the safety shields, chains or curtains are in place, since missing shields are a hazard and a red flag. The NIOSH agriculture program and OSHA's agriculture page cover machine guarding and safety, and are worth a read before running any PTO-driven tool.

Ask the seller

  1. How many seasons has it worked, and on what terrain?
  2. What has been replaced, and are there receipts?
  3. Has it hit anything serious?
  4. Why are you selling?
  5. Is the title or ownership paperwork clean?

Most honest sellers answer plainly. Vague answers are information too.

Match it to your tractor and your ground

A mower that is too big for your tractor will lug, and one that is too small wastes time. Check horsepower and PTO speed requirements, hitch type and weight. Think about slopes, brush and rocks, which all shorten blade life. Ask a dealer whether parts are still available for that model, because an orphaned machine may cost more to keep running than it saved to buy. Iowa State's ag decision maker machinery resources can help you weigh repair costs. For general small farm planning, see Cornell's small farms program.

Mower-specific trouble spots

Different mowers fail in different ways, so tailor the inspection. Rotary cutters often have bent or worn blade carriers, damaged skid shoes and cracked decks near the gearbox. Flail mowers have many small knives and bearings, so spin the rotor by hand and listen for roughness. Disc mowers need a close look at disc pans and the oil in the cutterbar, since leaks there are costly. Sickle mowers depend on sharp knives and tight drive components.

Look at the driveline too. A slip clutch or shear bolt protects the gearbox, so ask if it has been replaced with something stronger, which would remove that protection. Check that the shaft telescopes freely and the guards turn smoothly.

Finally, look at tires, wheels and any lift or fold mechanism, since a mower that can't be raised or folded safely is trouble on the road. Ask whether the seller has the manual, and ask a dealer if parts for that model can still be found.

If it passes your checks, get a written bill of sale. If something is off, negotiate, or leave it. There is always another mower, and your shins will thank you.