What should I check on a used rotary mower?

Decks, gearboxes and blades under the grime

CLARKSVILLE, Tennessee — A used rotary mower, whether it's a pull-behind brush cutter or a large finish deck, can look sound on the outside and be worn out underneath. The parts that take the punishment are the gearbox, spindles, blades, deck and driveline, and they're the parts to check carefully. Here's a walk-around you can do in about an hour, along with questions for the seller.

Learn the machine's story

Ask how many hours or acres it's mowed and what kind of work it did. A cutter that chewed brush and rocks lives a harder life than one that trimmed pasture. Ask about service history, including gearbox oil changes and spindle or blade replacement. Ask whether it ever hit a stump, a fence post or other hard object. Get the make, model and serial number so you can check parts availability with a dealer. Confirm that the cutter fits your tractor's PTO horsepower, speed and hitch category. A mismatched mower is a repair waiting for a date.

Check the deck and frame

Look over the deck for cracks, patched welds, dents and thin metal, especially around the blade path and spindle mounts. Heavy rust and pinholes mean the deck is wearing out. Check the frame, hitch and tongue for bends and fresh welds. Inspect the skid shoes, wheels and wheel arms for wear and damage. On wing decks, look at hinges, pivot pins and lift cylinders. Check that the rear chain guards, shields and deflectors are in place. Missing safety shielding is a red flag and a hazard.

Inspect blades and spindles

With the PTO disengaged and the tractor off, lift the deck safely and block it. Look at blade condition: sharp edges, thickness, nicks and bending. Check the blade bolts, bushings and mounting holes for wear. Spin the blade by hand and feel for play in the spindle. Rough, noisy or wobbly spindles mean bearing wear. Look at the blade carrier for cracks or bending. Check that the blades are matched in length and weight; mismatched blades cause vibration. Replacement blades and spindles can add up, so ask for written quotes if they're needed.

Test the driveline and gearbox

Check the PTO driveline for worn U-joints, bent tubes, damaged shields and a worn slip clutch. Check the gearbox for oil leaks, milky oil and a loose output shaft. Pull the fill plug and check the oil level and condition. Metal flakes on a magnetic plug mean wear. With the mower mounted and running at a safe idle, listen for grinding, knocking or high-pitched whining. Watch for excessive vibration. Check that the gearbox is the right type for the application, since some are built for lighter duty than others.

Compare and close the deal

Compare similar mowers and review machinery ownership economics from Iowa State Ag Decision Maker and farmdoc daily. Ask a dealer technician or independent mechanic to look it over if you're unsure. Get a written bill of sale with the serial number, the condition and any repairs promised. For safety, review OSHA and NIOSH guidance on PTO and mower hazards. Mowers throw debris, so keep bystanders well back.

Price it fairly

Compare the asking price against similar mowers, then subtract the repairs you'd need right away: blades, spindles, gearbox work, shields and tires. Ask for written quotes on those items so your math is based on real numbers. If the seller won't allow a test run or inspection, that's a reason to walk. A fair deal leaves room for repairs and still beats buying new, and a bad one only looks cheap until the first invoice arrives.

Finally, check the mower's decal and serial plate to confirm the rated PTO speed, because running a cutter at the wrong speed damages gearboxes and can throw blades.

If the seller has the mower freshly painted and the gearbox bone dry, that's not always good news. Paint covers a lot of sins, and a clean gearbox may just be a cleaned one.