What should I inspect on a used backhoe?
From the pins to the pump
LAREDO, Texas — A used backhoe, whether a loader-backhoe combination or a tractor-mounted unit, takes more abuse than most farm machines. It digs, lifts and swings all day with pins, bushings and cylinders carrying heavy loads. A clean-looking machine can hide a lot of wear. A careful inspection before you buy can keep you from inheriting someone else's repair list. Bring a flashlight, rags and a notebook, ask the seller to start the machine cold and don't rush.
Start cold and look around
Ask that the machine not be run before you arrive. A cold start shows hard starting, smoke, odd noises and slow hydraulics. Look under the machine for fresh leaks, and check the fluid levels and condition. Walk the frame and booms for cracks, repaired welds and bends, especially around the pivot points, stabilizer mounts and the swing frame. Check for signs of overheating or a rebuilt engine. Look at the serial number plate and check it matches the paperwork.
Pins, bushings and play
Wear in the digging end is the biggest expense risk. Grab the bucket and work it by hand if the machine is shut down and safe, or watch it in operation for slop at the bucket pins, dipper, boom and swing. Excess play means worn pins and bushings, which affect digging accuracy and can be costly to replace. Check the stabilizers and their pads for wear and leaks. Inspect the bucket teeth, cutting edge and any quick-attach for damage.
Hydraulics
Run each function through its full range: boom, dipper, bucket, swing, stabilizers, loader lift and tilt. Look for slow movement, jerky action, noise or drifting. Check cylinder rods for pitting or scoring and the seals for leaks. Inspect hoses for cracks, bulges and rubbing. Check the fluid for a milky look or a burnt smell. Hydraulic repairs can run up quickly, so be thorough. The OSHA agriculture page cautions about pressurized fluid hazards, so keep hands off when checking for leaks.
Engine, drivetrain and tires
Listen to the engine under load. Check for blue or black smoke, rough idle, overheating and oil pressure that drops when warm. Test the transmission and clutch or shuttle in all gears, and listen for whining or slipping. Check the axles and brakes. Look at tire wear for uneven patterns that hint at alignment problems. Examine the cab or ROPS structure, seat belt and safety features, since a damaged rollover structure is a serious issue. Check the hour meter against general wear, because a low reading on a worn machine deserves questions.
Questions for the seller
- Where was it used, and for what?
- Is there a service history and are there records?
- Have major repairs or rebuilds been done, and by whom?
- Why are you selling?
- Can I have a mechanic inspect it?
Verify and compare
Ask for title, lien information and a bill of sale. Check for liens before paying. Consider hiring an independent mechanic for a pre-purchase inspection. Compare the machine with similar listings locally, and use Iowa State's ag decision maker site and farmdoc daily for repair-versus-buy reasoning. Get all agreements in writing.
A pre-purchase inspection by an independent mechanic is often money well spent on a machine of this size. Ask the mechanic to take a fluid sample for lab analysis if you can, since results from engine oil and hydraulic fluid can reveal wear metals or contamination that you can't see. Check that safety decals are present, the seat belt works and lights, horn and backup alarm function. Ask whether manuals come with the machine and whether replacement parts are easy to find locally. Finally, think about transport: a loader-backhoe is heavy, and getting it home may need a larger trailer and a permit than you planned. Write down what you learn and the date you learned it, then compare notes across your sources before you commit to anything. A few minutes of comparison now usually saves a lot more time later, and it gives you something concrete to point to if a question comes up.
A backhoe with sloppy pins can still dig a hole. It just digs it somewhere close to where you pointed.
