What should I inspect on a used disc harrow?

Blades, bearings and the frame that holds them

GRAND ISLAND, Nebraska — A used disc harrow can do plenty of work for the money, but it also hides wear in places that don't show until it's behind the tractor. Blades wear, bearings fail, frames crack, and a unit that's been run hard on rocky ground may be far past its best days. Here's what to look over, in the order I'd do it, before agreeing on a price.

Ask about its history

Find out how many acres or years the harrow has covered, what soils it worked, and whether it's been used in rocky ground. Ask who owned it and how it was stored. Ask whether bearings, blades or scrapers have been replaced recently. Get the make, model and serial number so a dealer can help with parts availability. If it's an older unit, check whether bearings, blades and hydraulic parts are still available. A cheap harrow with no parts support can turn into a lawn ornament.

Check the blades

Look at the blade edges and diameters. Disc blades wear down in diameter, and worn blades don't cut or turn soil as well. Notched blades and scalloped edges should be consistent; look for cracked, bent, missing or chipped blades. Compare blades across the gangs to see if wear is even. Check the blade mounting, bolts and spacers, and look for loosened or elongated holes. Replacement blades are a cost to factor in, so ask for written quotes on a full set if the blades are near the end of their life.

Look at gangs, axles and bearings

Raise the harrow safely, with solid support rather than just the hydraulics, and spin each gang by hand. It should turn smoothly. Wobble, roughness or noise point to bearing wear. Feel for play by pushing and pulling on the gang. Look for grease seals that have failed and bearings packed with dirt. Check the gang axle for straightness, and the spool or spacers for wear. Look at the scrapers for wear or damage. Replacement bearings and axle work can add up, so identify which ones need attention.

Inspect the frame and hitch

Walk the frame looking for cracks, especially near welds, hinge points and hitch areas. Look for bent tubes, patched welds and signs of overloading. Check the tongue, clevis or three-point hitch pins and bushings for wear. On folding or offset models, inspect hinges, pivot points and locking pins. Check hydraulic cylinders, hoses and fittings for leaks and cracks. Check wheels, tires and transport lock devices on trailing models. A crooked frame means the harrow won't track, so pull it a short way and watch how it follows the tractor.

Check the match and the price

Confirm the harrow suits your tractor in weight, horsepower and hitch. Matching the machine to the tractor matters, since an oversized harrow can overload the tractor and an undersized one is slow. Compare similar units and review ownership costs using resources such as Iowa State Ag Decision Maker and farmdoc daily. If tillage practices are changing on your farm, check conservation guidance from NRCS before you invest. Get a written bill of sale listing the serial number and any promised repairs.

Match the harrow to your fields

A disc harrow that suits one farm may be wrong for another. Check the blade spacing and size against your crop residue and soil type, because heavier residue and tough ground call for larger blades. Ask what working depth the harrow is designed for, and whether the gang angle is adjustable. Think about how you plan to transport it, and whether the transport width fits your roads and gates. Talk to your local NRCS office or extension agent about tillage practices that suit your soils and erosion concerns before you commit to a purchase.

If you buy it, take time for a first-day check: grease every fitting, tighten the blade bolts and watch the gangs for the first hour of work.

Take a look at the soil on the blades too. If the previous owner left shiny, polished blades, the harrow saw recent work. If they're rusty and pitted, it's been sitting. Neither is a deal breaker, but both are information.