What should I inspect on a used plow?
Iron tells the story
ROCKFORD, Illinois — On a used plow, inspect the frame and beam alignment, the shares and moldboards, the hitch and any reversing or hydraulic parts, the wheels and bearings, and the overall wear. A plow works hard in dirt, so wear is normal. What you want to find out is whether it's the ordinary kind or the kind that bends, cracks or runs out of adjustment.
Frame, beams and welds
Walk around the whole plow with a flashlight and look for bent beams, cracks, patched welds and signs of past breaks. Fresh paint in odd spots can hide repairs. Check that the beams are straight and evenly spaced and that the frame sits square when the plow is on level ground. Look closely at stress points like beam mounting areas, hitch connections and pivot bearings. A twisted frame makes the plow hard to set and pull.
Shares, points and moldboards
Check each share and point for wear, since they're consumables, but also see how much metal is left on the moldboards and landsides. Look for deep grooves, thin spots or holes. Compare bottoms side by side; uneven wear can mean something is out of alignment. Ask what replacement parts cost for the bottoms and whether they're still available for that model. Parts availability for older plows can be a real problem.
Hitch, reversing and hydraulics
Look at the hitch pins, bushings and any adjustment holes for slop. If it's a reversible plow, run the reverse mechanism and watch for smooth, complete movement. Check hydraulic cylinders and hoses for leaks, scoring and damage. Any machine with a variable-width or auto-reset system needs a function test of those parts. Ask when the last major service was done.
Wheels, bearings and depth control
Check the gauge wheel, transport wheels, tires and bearings. Spin them and listen for roughness, and check for side play. Depth adjustments should turn freely and hold. Rusted-up adjusters point to long storage or neglect. If the plow uses springs or shear bolts for rock protection, check their condition and the type of bolts used, and ask about the recommended replacements.
Match it to your tractor and soil
A plow has to suit your tractor's horsepower, hitch category and hydraulics. Ask the seller for the model, bottom count and recommended tractor size, and check the manual. Consider your soil type and the residue you deal with. Whether plowing even makes sense for your operation depends on erosion risk and soil health goals; see NRCS and Soil Health Institute for conservation tillage information, and check the Web Soil Survey for your soils.
History and price check
Ask how many acres it has plowed, in what conditions and whether it has been stored inside. Ask for service records. Compare prices with similar plows by checking recent auction and dealer listings, then subtract the cost of needed repairs, using written quotes. If possible, pull it in a field and watch how it runs, checking furrow width and depth consistency.
Safety
Plows are heavy and have sharp edges. Block them securely when inspecting and never work under a raised plow supported only by hydraulics. See OSHA's agriculture page for guidance.
Tractor and setting questions
A plow that looks fine can still be a poor match. Check how many bottoms it has and whether your tractor can pull it at the depth you want, since a tractor that lugs at every turn is a sign of a plow that's too big. Ask the seller how it was set up: hitch point, leveling, front furrow width, and how the plow tracks behind the tractor. Look at the manual or ask the dealer for the recommended settings, and look up a manual for the model if one isn't included. Adjustments matter as much as iron. A well-set old plow beats a badly set newer one. If you've never run one, ask a neighbor or extension agent to show you the basics.
A good used plow can serve for decades. A bad one just serves as a lawn ornament with an attitude. Inspect before you pay.
