What should I inspect on a used tedder?
A walk-around checklist
WAUSAU, Wisconsin — A tedder looks simple. It's a row of spinning tine arms that fluff and spread hay so it dries faster, and there isn't much to it compared with a baler. That simplicity can fool a buyer into skipping the inspection. A used tedder that's been worked hard, left outside and neglected can have worn gearboxes, bent tine arms and cracked frames, and the parts bill can eat up the savings. Take your time on the walk-around, look at it running if you can and bring a flashlight and a notebook.
Start with the frame and hitch
Walk the whole frame and look for cracks, especially around welds, pivot points and the hitch. Check for bends that suggest it's been dragged into a fence post or a rock. If the tedder folds for transport, work the folding mechanism and check the hydraulic cylinders for leaks and pitted rods. Look at the hitch pins and bushings for slop. Check the stand or jack. Examine the tires or wheels, including the bearings, by lifting each wheel and feeling for play.
Rotors, tine arms and tines
Spin each rotor by hand and listen for grinding or binding. Check that the tine arms sit evenly, because a bent arm throws the rotor out of balance and causes vibration. Count the tines and look for missing, bent or broken ones. Check the tine holders and bolts, since loose hardware wears the mounting holes into ovals. Look at how worn the tine ends are and whether the arms are original or mismatched. Replacement tines are a small cost per piece but add up across a whole machine, so count the damage.
Gearboxes and driveline
Look at each gearbox for oil leaks, cracked housings and signs of repeated repair. Check the oil level and color, and look for water or metal flecks. Turn the input shaft and feel for roughness or excessive backlash. Inspect the PTO shaft, the shield and the shield bearings. A missing shield is a safety issue, and it's also a sign the previous owner didn't care for the machine. The OSHA agriculture page covers guarding and entanglement hazards.
Run it, if you can
Ask the seller to hook it to a tractor and run it at a safe distance from people. Watch the rotors for wobble. Listen for knocking, squealing or rhythmic clicks. Make sure the rotors turn smoothly in the direction they're supposed to and that the tines clear the ground evenly. Raise, lower and fold the machine through its full motion. If the seller won't let it run, that's a flag, though sometimes there's a legitimate reason.
Questions for the seller
- How many acres or seasons has it worked, and on what kind of hay?
- Has it been repaired, and who did the work?
- Has the gearbox oil been changed, and when?
- Where has it been stored?
- Are manuals and spare parts available?
Check parts availability before you buy. Ask a local dealer whether parts for that model can be had, and how long they take. An orphan machine with no parts is a lawn ornament.
Get a second opinion and a fair comparison
If you're not sure, bring a friend who has used tedders or a mechanic. Compare the machine with similar ones for sale locally, and use extension resources such as Penn State Extension or farmdoc daily to think through whether a used machine pencils out compared with custom work. For the budget side, the Iowa State ag decision maker site has machinery-cost tools. Get any promises from the seller in writing, including a bill of sale that lists the serial number.
Before you hand over money, picture the first week of ownership. Where will you store it, and does it fit through the shed door when folded? Does your tractor have the PTO speed and hydraulic outlets it needs? Do you have a hitch pin that fits? A tedder is only useful if it's ready when the hay is cut, so ask the seller to help you test it with your own tractor if at all possible. Ask for the owner's manual or a copy of one, since lubrication points and gearbox oil types are easy to get wrong without it. A bill of sale with the serial number written on it finishes the transaction cleanly.
Finally, consider how many acres you'll ted. If it's a few fields a year, a modest machine in decent shape is plenty.
