What should I inspect on a used trailer?
A walk-around checklist for used trailers
TULSA, Oklahoma — On a used trailer, inspect the frame and welds, the floor, the axles and suspension, the tires, the brakes and wiring, the coupler and safety chains, and the paperwork, in that order, because the structure is the part you can't cheaply fix. Whether it's a livestock trailer, flatbed, gooseneck or utility trailer, the checks are similar. A trailer carries heavy, living and expensive cargo down public roads, so spend an extra hour on the inspection and go home with a trailer you can trust.
Frame, floor and welds
Crawl underneath with a flashlight. Look for cracked welds, bent or twisted members, rust that flakes through, and patches welded over weak spots. Poke at the floor, particularly on livestock trailers where manure and moisture eat wood and steel. Soft spots, holes or fresh paint over bad boards are red flags. Check gates, latches, hinges and side walls for cracks and sharp edges that could hurt animals. Look at the hitch area, including the neck of a gooseneck, since that part carries stress every time you pull.
Axles, suspension and tires
Check that the axles are straight, springs aren't cracked or sagging, and bushings and shackles aren't worn out. Look at hub areas for grease leakage and wobble the wheels to check bearings. Inspect tires for cracks, uneven wear, bulges and age, since trailer tires age out before they wear out. A tire's date code is molded on the sidewall. Mismatched or worn tires and uneven wear point to alignment or axle issues.
Brakes, lights and coupler
- Test electric or hydraulic brakes, and the breakaway system.
- Check that all lights, turn signals and brake lights work.
- Inspect wiring for chafing and bad connectors.
- Check the coupler for wear and correct fit to your hitch.
- Check the safety chains and attachment points.
- Test the jack and any ramps or gates.
Hook it to your own truck if you can, and pull it a short way, listening for noises and watching how it tracks.
Rating plates and paperwork
Find the plate listing the weight ratings. Make sure the ratings fit what you plan to haul and what your truck can tow. Confirm the serial number matches the title or registration, and ask about liens. Rules on registration, brakes and lighting differ by state, so check with your state agency before you buy. Ask for any maintenance records.
Final checks and negotiating
Compare against similar trailers and get a written bill of sale. Consider a shop inspection for larger purchases. For equipment ownership costs, see Iowa State's ag decision maker. If you're hauling livestock, the Beef Quality Assurance program has guidance on animal handling and transport, and Temple Grandin's site offers handling and trailer design insights. For general road and machinery safety, the NIOSH agriculture program is useful.
Hauling livestock and safety considerations
Livestock trailers deserve extra scrutiny. Check the floor for slippery spots and rot, and look for sharp edges, protruding bolts and gaps where a hoof or leg could be caught. Ventilation matters, so inspect vents, slats and any roof openings. Check that dividers, gates and latches work smoothly and shut securely.
Look at the load rating relative to the animals you carry and your tow vehicle's rating. Overloading is a common cause of trouble. Check the hitch height and your truck's ball or gooseneck setup, so the trailer rides level. A trailer that sags in front or rear won't tow well.
Ask about the history of the trailer. Was it used for animals, fertilizer, chemicals or heavy equipment? Salt and some fertilizers speed corrosion. Test the lights and brakes with your own truck, and look for any signs of a previous accident. Finally, check what your state requires for registration, inspection and lights, since requirements differ.
A tired trailer is a gamble with your cargo. If the welds, tires and brakes check out, you've got a good one. If they don't, there's another trailer down the road.
